If you're downloading a large file, and the end comes, you receive a Skype call is interrupted by a customer in London, without notice, Wi-Fi, so downloading and VoIP call in the chaos. Repeat the wireless connection, but the router is blinking content in your thesis, it seems to be out. After 3 hours, which appears for no reason, your Wi-Fi miraculously recovers.
Wireless networks can be a simple, yet it has a headache, it's greatIf it works, ed. A mind-boggling frustration when there is a common complaint among many, the Wi-Fi have moved that their wireless connection mysteriously disappears in and out of the frequency.
These steps will help create a stable, always on wireless connections.
1 Replace the handset. Cordless phones are among the worst sources of interference with wireless networks. They want a higher power than Wi-Fi gear, and stronger so thattherefore difficult to discuss, and tend to transmit frequently, especially when the handset and base station are separated. Some cordless phones at 2.4 GHz you can select a channel, in which case you can try separating the phone's frequency from the frequency of the wireless network. For example, set the phone to channel 1 and channel 11 on your wireless router If your phone does not allow a channel to try a little 'distance between the phone and router. In general, there is agood idea, a cordless phone next to a wireless router instead. If it fails, replace the phone with a 5-GHz 2.4 GHz phone. In this way, the phone and the network will not be in the same airspace and not interfere with each other.
2 Expand your wireless network. The farther from your wireless router to block the greater the risk of interference or slow down the connection. For example, you may be able to connect properly in your home, but the terrace isan intermittent connection, if your neighbor has disappeared with her cordless phone. The signal on the terrace is too weak to face the problems that occupy the house next door. It can strengthen the connection with antennas or repeaters, or you can use a power line bridge to import the connection from the router to your patio and an access point power line. Instead of the weak signal from the router off, you now have a strong signal from aAccess Point, where you want to prove your coverage area instead.
3 Change channel. Interference is a likely cause of intermittent connections, such as those described above. All 802.11b and 802.11g networks operate at 2.4 GHz, a small slice of the spectrum, once used primarily by amateur radio enthusiasts. Today, these radios and other WiFi devices, Bluetooth devices, cordless phones, microwave ovens, baby monitors and wireless surveillance equipment, all the people of the spectrum. WhenThese devices compete for the same environment, can interfere with each other, which can block the signals from each other. Fortunately there are ways to avoid and minimize interference in many situations. In the United States, 802.11b and 802.11g devices can be configured to operate in one of 11 channels. Unfortunately, these channels overlap with adjacent channels, so you have only three non-overlapping channels: channels 1, 6, and 11 If your neighbor has aWireless network, which are both set to channel 6, interruptions. You can resolve the problem by resetting the wireless router to another, preferably non-overlapping channels to create remedy in this case, 1 or 11
| Price : $59.88
